Guide to Sodding Your Lawn by Starr Turf Grass & Stone

Laying sod is an excellent way to give your landscaping a facelift and achieve a lush, green lawn in a short span of time. If you’re getting ready for sod installation in Sunnyvale, TX, then follow this step-by-step guide to help ensure the project’s success:

Step 1: Prepare the Soil

To ready your soil for your new lawn, test it well before the day that you plan to install the sod. Getting the test results back and adjusting your soil as needed may take several weeks. Also, loosen the soil with a rototiller and till in lime or fertilizer, depending on the results of the soil test.

Step 2: Level the Are9

Before you begin laying sod, it’s critical that you level your yard. Use a rake to even out the soil and fill in low areas with additional soil, if necessary.

Step 3: Lay the Sod

Now, you’re ready to begin laying sod to create your new lawn. For this step, unroll the first length of turf grass along a straight edge. Starting against a driveway, fence, or patio can help ensure that the sod is positioned neatly and evenly. Smooth out wrinkles and air pockets as you go and work with only 1 roll of sod at a time. When you unroll the second row, lay the grass so that the seams are staggered. Finally, remember to align the pieces tightly without causing them to overlap.

Step 4: Roll the Grass

With the sod in place, use a lawn roller to push the sod down against the soil beneath it. Ensuring a tight bond between the 2 layers will promote better root growth and help get your grass off to a great start.

Step 5: Water Your Lawn

Finally, give your newly installed sod a thorough watering and water it daily when there isn’t rain. If your lawn is puddling, then you are watering too much. Begin watering just every other day after the first week, and continue to taper off watering frequency to help encourage deep root growth.